Designing a simple table with basic tools can be a rewarding DIY project. Here’s a step-by-step guide to help you create a functional and attractive table:

**1. Materials and Tools:**
Gather your materials, including wood boards for the tabletop and legs, screws or nails, a saw, measuring tape, a pencil, a square, a drill, and sandpaper.

**2. Design and Measurements:**
Decide on the dimensions of your table. Measure and mark the length and width of the tabletop on the wood. Consider the height you want for the table and measure the legs accordingly.

**3. Cutting the Wood:**
Using a saw, cut the wood boards to your measured dimensions. If you’re not confident in your sawing skills, most hardware stores can cut the wood for you according to your measurements.

**4. Assembly:**
Lay the tabletop pieces flat on a clean and even surface. Arrange them side by side with even spacing. Attach them together by screwing or nailing them to support braces that run underneath the tabletop.

**5. Attaching the Legs:**
Position the legs at each corner of the tabletop. Use a square to ensure they’re perpendicular to the tabletop. Mark where the legs will be attached and pre-drill holes. Attach the legs using screws or nails, making sure they’re securely fastened.

**6. Sanding and Smoothing:**
Sand the edges, corners, and surfaces of the table to remove any rough edges or splinters. This step gives your table a polished look and prevents any potential injuries.

**7. Finishing Touches:**
Apply a finish to the wood if desired, such as paint, stain, or a clear sealant, to protect the wood and enhance its appearance. Allow the finish to dry according to the manufacturer’s instructions.

**8. Inspection:**
Inspect your table for stability and make sure all the joints and connections are secure. Give it a gentle shake to ensure it doesn’t wobble.

**9. Enjoy Your Creation:**
Place your newly designed table in the desired location and use it to your heart’s content. Whether it’s for dining, working, or display, your handmade table adds a personal touch to your space.

Remember, simplicity is key when using basic tools. Start with a straightforward design, and as you gain more confidence and skills, you can experiment with more complex table designs and woodworking techniques.